•
ALL TRIMS: SPORT, OVERLAND, RUBICON, MOJAVE

 

JEEP GLADIATOR JT (Gas) HD 2.5" ENFORCER SUSPENSION SYSTEMS FOR HEAVY DUTY

The EVO MFG 2.5” Jeep Gladiator JT HEAVY DUTY Enforcer Suspension Systems lift and level your 2020+ Jeep Gladiator JT 2.5”s. HD Enforcer kits come with Higher Capacity coils, suggested on highly accessorized builds, generally Overland builds. The JT Enforcer kits are specifically designed and engineered to lift your JL and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 2.5-5” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks. These kits come with a set of 2.5” lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side.

 

OVERLAND SYSTEM:

The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets we relocate the front control arm mounting locations at the frame. In doing this when lifted we maintain factory flatter control arm angles and while minimal, we alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. Both kits drive very well, the Overland Kits are better suited for less hard off-road crawling and more light off road and on road use.

 

INSTALLATION

 

The EVO MFG 2.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no driveshaft or exhaust modifications. Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.

STAGE 1 KITS

includes all the necessary parts to lift your JT 2.5”s.

 

STAGE 2 KITS

includes Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments. Stage 1 Overland or Stage 2 is the recommended minimum kit for all currently unmodified/stock suspension JLUs.

 

STAGE 3 KITS

includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

 

STAGE 4 KITS

includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

 

All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation. The included Enforcer arms are manufactured from large diameter, thick DOM Steel Tubing for ultimate in strength and longevity both on and off the trail. These kits require wheel spacers or aftermarket wheels with smaller backspacing.

TRACK BARS

 

Front and rear adjustable trackbars to fine tune axle center are included with PLUS “P” kits. “K” Kits include a set of 4 EVO SPEC King Shocks. "KA" Kits include 4 EVO SPEC King Shocks with compression adjusters.

Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks

Enforcer / Enforcer HD

Enforcer kits come with plush ride coils for ideal riding normal truck builds with normal accessories (bumpers, winch, sliders etc).

HD kits come with higher capacity coils that can be optioned for highly accessorized/weighted Jeeps generally, Generally Overland builds.

Upgrades:

EVO-3097V Front Inner Fenders
EVO-600081KB Front Air Bumps

MOJAVE: 2.0 and 2.5" King Shocks ARE Mojave compatible. Bilstein Shocks are not compatible.


WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

EVO Manufacturing

2.5" HEAVY DUTY GAS Jeep Gladiator JT HD LIFT KIT ENFORCER SUSPENSION SYSTEMS FOR HEAVY DUTY

SKU EVO-3060S1HD
$876.07
ALL TRIMS: SPORT, OVERLAND, RUBICON, MOJAVE

 

JEEP GLADIATOR JT (Gas) HD 2.5" ENFORCER SUSPENSION SYSTEMS FOR HEAVY DUTY

The EVO MFG 2.5” Jeep Gladiator JT HEAVY DUTY Enforcer Suspension Systems lift and level your 2020+ Jeep Gladiator JT 2.5”s. HD Enforcer kits come with Higher Capacity coils, suggested on highly accessorized builds, generally Overland builds. The JT Enforcer kits are specifically designed and engineered to lift your JL and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 2.5-5” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks. These kits come with a set of 2.5” lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side.

 

OVERLAND SYSTEM:

The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets we relocate the front control arm mounting locations at the frame. In doing this when lifted we maintain factory flatter control arm angles and while minimal, we alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. Both kits drive very well, the Overland Kits are better suited for less hard off-road crawling and more light off road and on road use.

 

INSTALLATION

 

The EVO MFG 2.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no driveshaft or exhaust modifications. Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.

STAGE 1 KITS

includes all the necessary parts to lift your JT 2.5”s.

 

STAGE 2 KITS

includes Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments. Stage 1 Overland or Stage 2 is the recommended minimum kit for all currently unmodified/stock suspension JLUs.

 

STAGE 3 KITS

includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

 

STAGE 4 KITS

includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

 

All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation. The included Enforcer arms are manufactured from large diameter, thick DOM Steel Tubing for ultimate in strength and longevity both on and off the trail. These kits require wheel spacers or aftermarket wheels with smaller backspacing.

TRACK BARS

 

Front and rear adjustable trackbars to fine tune axle center are included with PLUS “P” kits. “K” Kits include a set of 4 EVO SPEC King Shocks. "KA" Kits include 4 EVO SPEC King Shocks with compression adjusters.

Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks

Enforcer / Enforcer HD

Enforcer kits come with plush ride coils for ideal riding normal truck builds with normal accessories (bumpers, winch, sliders etc).

HD kits come with higher capacity coils that can be optioned for highly accessorized/weighted Jeeps generally, Generally Overland builds.

Upgrades:

EVO-3097V Front Inner Fenders
EVO-600081KB Front Air Bumps

MOJAVE: 2.0 and 2.5" King Shocks ARE Mojave compatible. Bilstein Shocks are not compatible.


WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
$876.07
Stage:
Shocks:
Track Bars:

∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers

ALL TRIMS: SPORT, OVERLAND, RUBICON, MOJAVE

 

JEEP GLADIATOR JT (Gas) HD 2.5" ENFORCER SUSPENSION SYSTEMS FOR HEAVY DUTY

The EVO MFG 2.5” Jeep Gladiator JT HEAVY DUTY Enforcer Suspension Systems lift and level your 2020+ Jeep Gladiator JT 2.5”s. HD Enforcer kits come with Higher Capacity coils, suggested on highly accessorized builds, generally Overland builds. The JT Enforcer kits are specifically designed and engineered to lift your JL and maintain a performance spring rate, smooth ride quality all while retaining tow capacities. These kits allow for use of your choice of any aftermarket 2.5-5” lift shock or use of our EVO SPEC tuned 2.5” Remote Reservoir King Shocks. These kits come with a set of 2.5” lift springs specific to each corner which will keep the Jeep Gladiator JT level side to side.

 

OVERLAND SYSTEM:

The difference with EVO MFG Enforcer Overland systems vs EVO MFG Enforcer systems is the use of front Overland Control Arm Brackets. When lifting your vehicle your control arms at ride height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With the use of the included Overland Control Arm brackets we relocate the front control arm mounting locations at the frame. In doing this when lifted we maintain factory flatter control arm angles and while minimal, we alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking and driveline angles through suspension cycle. Both kits drive very well, the Overland Kits are better suited for less hard off-road crawling and more light off road and on road use.

 

INSTALLATION

 

The EVO MFG 2.5" JT Enforcer Kits are easy to install using normal tools. No drilling or cutting. They require no driveshaft or exhaust modifications. Simple Bolt on installation. EVO MFG JT Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road.

STAGE 1 KITS

includes all the necessary parts to lift your JT 2.5”s.

 

STAGE 2 KITS

includes Stage 1 components as well as EVO MFG Enforcer Front Lower Adjustable Control Arms to allow for caster adjustments. Stage 1 Overland or Stage 2 is the recommended minimum kit for all currently unmodified/stock suspension JLUs.

 

STAGE 3 KITS

includes stage 2 components as well as EVO MFG Enforcer rear upper adjustable control arms for rear pinion angle adjustment.

 

STAGE 4 KITS

includes stages 1 components with all 8 EVO MFG Enforcer control arms for full front and rear axle adjustments.

 

All included Enforcer Arms use only rebuildable free articulating spherical bearings on all ends of each arm giving restriction free travel and articulation. The included Enforcer arms are manufactured from large diameter, thick DOM Steel Tubing for ultimate in strength and longevity both on and off the trail. These kits require wheel spacers or aftermarket wheels with smaller backspacing.

TRACK BARS

 

Front and rear adjustable trackbars to fine tune axle center are included with PLUS “P” kits. “K” Kits include a set of 4 EVO SPEC King Shocks. "KA" Kits include 4 EVO SPEC King Shocks with compression adjusters.

Stock Front and Rear Driveshafts compatible when paired with Packaged Shocks

Enforcer / Enforcer HD

Enforcer kits come with plush ride coils for ideal riding normal truck builds with normal accessories (bumpers, winch, sliders etc).

HD kits come with higher capacity coils that can be optioned for highly accessorized/weighted Jeeps generally, Generally Overland builds.

Upgrades:

EVO-3097V Front Inner Fenders
EVO-600081KB Front Air Bumps

MOJAVE: 2.0 and 2.5" King Shocks ARE Mojave compatible. Bilstein Shocks are not compatible.


WARNING: This product can expose you to chemicals including silica, crystalline which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.



Frequently Bought Together

Total price$4,515.91

Complementary products

    Featured recent posts

    • Free Shipping above $500

      Free for all orders over $500 worldwide

    • 30 days return policy

      Order without worry

    • Flexible Delivery Time

      Choose your delivery time